ARP Head Bolts and Studs

 

  • ARP undercut HEAD studs for all
    VW/Audi 1.8 and 2 liter 16v engines
  • Engine code KR, PL, 6A, 9A, ABF, ACE
  • Comes with instructions and ARP lubrication
  • Complete set: 124 EURO

  • ARP undercut HEAD studs for all
    Audi 5cyl 20v engines
  • Engine code 3B, AAN, ABY, ADU, RR, 7A
  • Comes with instructions and ARP lubrication
  • Complete set: 149 EURO

  • ARP undercut HEAD studs for
    Audi 5cyl 20v STROKER engines
  • These are 12mm studs, which are needed when
    TDI tall block is used
  • Requires drilling of bolt holes in cyl head up to 12.2mm
  • Comes with instructions and ARP lubrication
  • Complete set: 171 EURO

  • ARP undercut HEAD studs for
    VW/Audi 4cyl 16v STROKER engines
  • These are 12mm studs, which are needed when
    TDI tall block is used
  • Requires drilling of bolt holes in cyl head up to 12.2mm
  • Comes with instructions and ARP lubrication
  • Complete set: 145 EURO

 ARP Main Stud Kit

  • ARP main stud kit for 4cyl VW/Audi 1.6-1.8-2.0
    For 058/027 blocks with shaft driven oil pump
  • Complete set: 89 EURO

  • ARP main stud kit for 4cyl VW/Audi 1.9-2.0 DIESEL
    For 038/028 blocks with chain or shaft driven oil pump
  • Complete set: 95 EURO

  • ARP main stud kit for 4cyl VW/Audi 1.6-1.8-2.0
    For 06A/06B blocks with chain driven oil pump
  • Complete set:  95 EURO

  • ARP main stud kit for ALL 5cyl 10v-20v
    Also for Diesel blocks
  • Complete set: 107 EURO

 ARP Ring Gear Bolt Set

  • ARP ring gear bolt set for VW 020 transmission
  • Complete set: 49 EURO

  • ARP ring gear bolt set for VW 02A transmission
  • Complete set: 54 EURO

  • ARP ring gear bolt set for VW 02M transmission
  • Complete set: 78 EURO

 ARP Flywheel Bolts
 

Has a integrated shoulder for tight fit. ARP pro series alloy with superior strength. These bolts should be used in all race engines. A run-away flywheel is extremely dangerous and expensive!
  • Fit all 5cyl Audi with solid flywheel (8 required)
  • Can also be used for following:
    - Older Audi V8 (10 required)
    - Some VR6 engines (10 required)
    - Older V6 engines (8 required)
    - "short" bolted 4cyl flywheels (6 required)
  • Must be Torqued to 115Nm lubed with Loctite on threads and under bolt head to avoid oil leaks
  • Price for EACH bolt: 6.50 EURO