These products are designed for 4cyl vw/Audi 06A/058/027 and 1.9 diesel engine blocks. Their purpose is to shave oil of the crankshaft on both up and downstroke.

They are also reducing oil foaming which happen when the crank is whipping up the oil. So when these scrapers are used, the crank will spin easier and there is less risk of air bubbles in the oil system.
This makes more power, and better lubrication of the engine.

These crank scrapers are a very unique product, and it takes a lot of work to design and make them.

Installation requires some patience and mechanical skills.


- Crank Scraper Installation instructions: click here (414 KB *.pdf)

- Suggestions for RTV Silicone Gasket Maker use: click here


The crank scrapers are available in several engine applications, and they are mainly divided into two block versions:

• 86.4mm stroke
• 92.8mm stroke
• 95.5mm stroke
• Price:  80 EURO

• 86.4mm stroke
• 92.8mm stroke
• 95.5mm stroke
• Price: 75 EURO