Convert to solid lifters
-
Solid lifters
-
Lash caps
back to the top
Solid lifters 35 mm
Converting all VW/Audi hydro lifter heads to solid
has a 14.7mm stud
all surfaces are precision grinded
must be used with lash caps OR longer valves
weight is 48gram
height is 26.8mm
they can also be used in Volvo B234 and B204 cyl heads for the same conversion
Price for one lifter: 17.00 €
solid lifters for use in all 5 valve engines such as
1.8t 20v, 2.7t 30v, and more
intake lifter has a 15mm internal foot,
exhaust lifter has a 16mm internal foot
Price for one lifter: 19.00 €
35 mm solid lifters
For use in combination with longer valves
Has a 4.1mm thick “roof”
All surfaces are precision grinded
Must be used with longer valves
Weight is 40gram
Height is 26.8mm
Can also replace older style “shim over”
type solid lifters
Volvo B234/B204 and Ford Cosworth can also
use these lifters
Price for one lifter 17.00 EURO
back to the top
Lash caps
Used between valve stem tip and lifter
ment for use in combination with our solid valve lifter for setting the valve clearance
for
7mm
valve stem
sold in one height only
the height must be grinded for each application, please specify if it is for exhaust or intake valve
all these lash caps are 5mm tall, and are “hanging” 2.5mm outside the stem
Price for one lash cap: 2.00 €
ment for use in combination with our solid valve lifter for setting the valve clearance
for
6mm
valve stem
such as all 5 valve engines in combination with solid lifters
sold in one height only
the height must be grinded for each application,
please specify if it is for exhaust or intake valve
Installed over the valve stem, hangs 3.3mm over the stem and is 2.5mm thick
Price for one lash cap: 2.00 €
specially designed for Turbo engines using our 35mm solid lifter
hanging 5mm outside of the stem inside the lifter
5mm
thick
Price for one lash cap: 2.00 €
back to the top