Valves and guides

Custom made 7mm Manganese-bronze valve guides for:
VW/Audi 16v, 5cyl 20v, V8 32v

 

These guides are superior to others, because of following:

  • Tapered for better flow
  • Shorter than stock for better flow
  • Much more wear resistant and better heat transfer
  • Price: 5 EURO each

Qed/Supertech manganese-bronze valve guides
for 5valve engine's

 

These guides are superior to others, because of following:

  • Correct outside diameter
  • Much more wear resistant and better heat transfer
  • Price: 4 EURO each

Viton 7mm valve stem seal

 Viton seal
  • For all VW/Audi engine's with 7mm valve stems
  • More wear resistant
  • Handles heat much better than stock seals
  • Price: 2 EURO each

Viton 6mm valve stem seal
  • For all VW/Audi engine's with 6mm valve stems
  • More wear resistant
  • Handles heat much better than stock seals
  • Price: 2 EURO each

Stainless steel 0,5mm oversize exhaust valves
For use in following engine code 16v, 5cyl 20v, V8 32v Kr, pl, 6a, 9a,
aby, adu, 3b, aan, rr, 7a, pt, abh
  • 7mm stem and standard 98,2mm height with single groove valve lock
  • Made from premium stainless steel
  • Valve is 28,5mm diameter (0,5mm oversize) for improved flow
  • No need for changing of valve seats
  • Valve seats only needs to be cut for the bigger valve
  • Direct fit for standard valve train or in combination with our valvetrain parts
  • Price: 15 EURO each

Stainless steel STANDARD size exhaust valves
For use in following engine code 16v, 5cyl 20v, V8 32v Kr, pl, 6a, 9a,
aby, adu, 3b, aan, rr, 7a, pt, abh
  • 7mm stem and standard 98,2mm height with single groove valve lock
  • Made from premium stainless steel
  • Valve is 28mm diameter
  • Direct fit for standard valve train or in combination with our valvetrain parts
  • Price: 18 EURO each

Stainless steel standard size exhaust valve
For use in all VR6 12V 2.8-2.9liter engine's
34.2 mm
  • 7mm stem and standard 106,95mm height with tripple groove valve lock
  • Made from premium stainless steel and black nitrided
  • Lower section of stem is undercut for improved flow
  • Valve is 34.20mm diameter (standard)  
  • Direct fit for standard valve train or in combination with our valvetrain parts
  • Price: 19 EURO each

Stainless steel standard size intake valve
For use in all VR6 12V 2.8-2.9liter engine's
39mm
  • 7mm stem and standard 105,95mm height with tripple groove valve lock
  • Made from premium stainless steel and black nitrided
  • Lower section of stem is undercut for improved flow
  • Valve is 39mm diameter (standard)  
  • Direct fit for standard valve train or in combination with our valvetrain parts
  • Price: 20 EURO each

Stainless steel 0,5mm oversize intake valves
For use in following engine code 16v, 5cyl 20v, V8 32v Kr, pl, 6a, 9a, aby, adu, 3b, aan, rr, 7a, pt, abh

 
  • 7mm stem and standard 95,5mm height with single groove valve lock
  • Made from premium stainless steel
  • Lower section of stem is undercut for improved flow
  • Valve is 32,5mm diameter (0,5mm oversize) for improved flow
  • No need for changing of valve seats
  • Valve seats only needs to be cut for the bigger valve
  • Direct fit for standard valve train or in combination with our valvetrain parts
  • Price: 15 EURO each

Inconel STANDARD size 27mm exhaust valve
For use in following engine code ABF, ACE, late 9A

 Iconel exhaust
  • 7mm stem and 98,2mm height with single groove valve lock
  • Made from Inconel
  • Valve is 27mm diameter
  • ABF, ACE and late 9A use tripple groove as standard
  • This valve is a single groove
  • So it must use keepers 027 109 651 and retainer from KR,PL engine
  • These parts can be arranged at additional cost
  • Price: 28 EURO each

Inconel exhaust valves for 4 and 6cyl 5v engine's

 Iconel exhaust
  • 6mm stem and standard 103,9mm height
  • Made from premium inconel
  • Available in 3 versions as below
  • 29,9mm diameter (standard size) tripple groove lock:
    26 EURO each
  • 29,9mm diameter (standard size) single groove lock:
    28 EURO each
  • 30,9mm diameter (+1mm single groove lock):
    28 EURO each
  • Direct fit for standard valve train or in combination with our valvetrain parts

Black nitrided stainless steel intake valves for 4 and 6cyl 5v engine's

 Black
  • 6mm stem and standard 105,1mm height
  • Made from premium stainless and black nitrided
  • Available in 3 versions as below
  • 26,9mm diameter (standard size) tripple groove lock:
    18 EURO each
  • 26,9mm diameter (standard size) single groove lock:
    20 EURO each
  • 27,9mm diameter (+1mm single groove lock):
    20 EURO each
  • Direct fit for standard valve train or in combination with our valvetrain parts

Single groove keepers 6mm

 Single grove keepers
  • For all vw/Audi 5v engines that has converted to single groove valve stems
  • These locks are included in the price, when buying single groove 6mm valves from us
  • Can be purchased separate for 3 EURO (enough for 1 valve)